Electro-Voice CPS4.5

• Four channels in one compact rack-efficient unit
• 500 W per channel
• 70/100 V operation for distributed systems
• Class-D design for optimum efficiency
• Slot for optional RCM-810 module, allowing IRIS-Net control and monitoring
• IRIS-Net selection of each channel's impedance (2-10 Ω in 0.1 Ω steps)
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter (Hi-Z mode)
• Complete protection: thermal, overload, shorts, HF, DC, back-EMF, inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings

• Amplifier Gain	32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
  Analog Inputs	4, electronically balanced, Phoenix-type
  Audio Network	No
  CAN Bus Interface	Optional (RCM-810 card)
  Continuous Rated Power (1 kHz, THD 1%) 100v	500 Watts
  Continuous Rated Power (1 kHz, THD 1%) 2Ω	500 Watts
  Continuous Rated Power (1 kHz, THD 1%) 4Ω	500 Watts
  Continuous Rated Power (1 kHz, THD 1%) 70v	500 Watts
  Continuous Rated Power (1 kHz, THD 1%) 8Ω	250 Watts
  Continuous Rated Power (20-20 kHz,THD<0,2%) 100v	450 Watts
  Continuous Rated Power (20-20 kHz,THD<0,2%) 4Ω	450 Watts
  Continuous Rated Power (20-20 kHz,THD<0,2%) 70v	450 Watts
  Continuous Rated Power (20-20 kHz,THD<0,2%) 8Ω	225 Watts
  Cooling	Front-to-Rear, continuously variable fans
  DIM 30	0.02 %
  Electronics Type	Amplifier
  Frequency Response	15 Hz-30 kHz
  Impedance	2/4/8/8 VLD/70 V/100V Ω
  Input Impedance (Balanced)	20 kΩ
  Input Sensitivity	0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55) 70V/100V
  Intermodulation Distortion (SMPTE)	0.05 %
  Mains Voltage	220 - 240 V, 50 - 60 Hz or 120 V, 50 - 60 Hz, 50 - 60 Hz
  Maximum Bridged Output 4Ω	1000 Watts
  Maximum Bridged Output 8Ω	1000 Watts
  Maximum Input Voltage	22 9.76 Vrms
  Network Control (IRIS-Net)	Optional (RCM-810 card)
  Signal-to-Noise Ratio (A-weighted)	100 dB
  Slew Rate	28 V/µs
  Topology	Class-D
  Total Harmonic Distortion	0.05 %
  Variable Load Drive (VLD)	Yes
  Height	2RU 88.1 mm (3.47")
  Width	482.6 mm (19")
  Depth	421.5 mm (16.59")
  Weight Net	11.1 kg (24.47 lbs)

• Front-to-rear fans

Electro-Voice CPS8.5

• Eight channels in one compact rack-efficient unit
• 500 W per channel
• 70/100 V operation for distributed systems
• Class-D design for optimum efficiency
• Slot for optional RCM-810 module, allowing IRIS-Net control and monitoring
• IRIS-Net selection of each channel's impedance (2-10 Ω in 0.1 Ω steps)
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter (Hi-Z mode)
• Complete protection: thermal, overload, shorts, HF, DC, back-EMF, inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay setti

• Amplifier Gain	32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
  Analog Inputs	8, electronically balanced, Phoenix-type
  Audio Network	No
  CAN Bus Interface	Optional (RCM-810 card)
  Continuous Rated Power (1 kHz, THD 1%) 100v	500 Watts
  Continuous Rated Power (1 kHz, THD 1%) 2Ω	500 Watts
  Continuous Rated Power (1 kHz, THD 1%) 4Ω	500 Watts
  Continuous Rated Power (1 kHz, THD 1%) 70v	500 Watts
  Continuous Rated Power (1 kHz, THD 1%) 8Ω	250 Watts
  Continuous Rated Power (20-20 kHz,THD<0,2%) 100v	500 Watts
  Continuous Rated Power (20-20 kHz,THD<0,2%) 4Ω	450 Watts
  Continuous Rated Power (20-20 kHz,THD<0,2%) 70v	450 Watts
  Continuous Rated Power (20-20 kHz,THD<0,2%) 8Ω	225 Watts
  Cooling	Front-to-Rear, continuously variable fans
  DIM 30	0.02 %
  Electronics Type	Amplifier
  Frequency Response	15 Hz-30,000 Hz
  Impedance	2/4/8/8 VLD/71 V/100V Ω
  Input Impedance (Balanced)	20 kΩ
  Input Sensitivity	0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55) 70V/100V
  Mains Voltage	220 - 240 V, 50 - 60 Hz or 120 V, 50 - 60 Hz, 50 - 60 Hz
  Maximum Bridged Output 4Ω	1000 Watts
  Maximum Bridged Output 8Ω	1000 Watts
  Maximum Input Voltage	+22 (9.76 Vrms)
  Network Control (IRIS-Net)	Optional (RCM-810 card)
  Signal-to-Noise Ratio (A-weighted)	100 dB
  Slew Rate	28 V/µs
  Topology	Class-D
  Total Harmonic Distortion	0.05 %
  Variable Load Drive (VLD)	Yes
  Height	2RU 88.1 mm (3.47")
  Width	482.6 mm (19")
  Depth	421.5 mm (16.59")
  Weight Net	13.9 kg (30.64 lbs)

  ngs
• Front-to-rear fans

Electro-Voice CPS4.10

• Four channels in one compact rack-efficient unit
• 1000 W per channel
• 70/100 V operation for distributed systems
• Class-D design for optimum efficiency
• Slot for optional RCM-810 module, allowing IRIS-Net control and monitoring
• IRIS-Net selection of each channel's impedance (2-10 Ω in 0.1 Ω steps)
• Rear-mounted attenuators
• Switchable 50 Hz high-pass filter (Hi-Z mode)
• Complete protection: thermal, overload, shorts, HF, DC, back-EMF, inrush current
• Phoenix-type input and output connections
• Remote power-on/off contact
• Programmable power-on delay settings

• Amplifier Gain	32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
  Analog Inputs	4, electronically balanced, Phoenix-type
  Audio Network	No
  CAN Bus Interface	Optional (RCM-810 card)
  Continuous Rated Power (1 kHz, THD 1%) 100v	1000 Watts
  Continuous Rated Power (1 kHz, THD 1%) 2Ω	1000 Watts
  Continuous Rated Power (1 kHz, THD 1%) 4Ω	1000 Watts
  Continuous Rated Power (1 kHz, THD 1%) 70v	1000 Watts
  Continuous Rated Power (1 kHz, THD 1%) 8Ω	500 Watts
  Continuous Rated Power (20-20 kHz,THD<0,2%) 100v	900 Watts
  Continuous Rated Power (20-20 kHz,THD<0,2%) 4Ω	900 Watts
  Continuous Rated Power (20-20 kHz,THD<0,2%) 70v	900 Watts
  Continuous Rated Power (20-20 kHz,THD<0,2%) 8Ω	450 Watts
  Cooling	Front-to-Rear, continuously variable fans
  DIM 30	0.02 %
  Electronics Type	Amplifier
  Frequency Response	15 Hz-30 kHz
  Impedance	2/4/8/8 VLD/70 V/100V Ω
  Input Impedance (Balanced)	20 kΩ
  Input Sensitivity	0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55) 70V/100V
  Intermodulation Distortion (SMPTE)	0.05 %
  Mains Voltage	220 - 240 V, 50 - 60 Hz or 120 V, 50 - 60 Hz, 50 - 60 Hz
  Maximum Bridged Output 4Ω	2000 Watts
  Maximum Bridged Output 8Ω	2000 Watts
  Maximum Input Voltage	22 9.76 Vrms
  Network Control (IRIS-Net)	Optional (RCM-810 card)
  Signal-to-Noise Ratio (A-weighted)	103 dB
  Slew Rate	28 V/µs
  Topology	Class-D
  Total Harmonic Distortion	0.05 %
  Variable Load Drive (VLD)	Yes
  Height	2RU 88.1 mm (3.47")
  Width	482.6 mm (19")
  Depth	421.5 mm (16.59")
  Weight Net	11.1 kg (24.47 lbs)

• Front-to-rear fans

Electro-Voice RCM810

• Enable powerful control and supervision capabilities
• Integrate up to 100 devices in each remote control network, 250 with multiple networks
• Support for 2-, 4-, and 8-channel CPS models
• Freely programmable control inputs and outputs
• Load-monitoring for each channel
• Variable Load Drive for independent channel impedance on 4- and 8-channel amps  (2-10 Ω in 0.1 Ω steps)

• Audio Network	No
  CAN Bus Interface	10 - 500 kbaud, 2x RJ-45 (IRIS-Net Control)
  FIR-Drive	No
  GPIO Control Ports	2 x 3-pole Euro block 2 Control Inputs 2 Control Outputs 2 Reference Outputs (+5 V, 200 mA / GND)
  Internal Processing	None
  Network Control (IRIS-Net)	Yes
  Network Interface	CAN Bus
  Variable Load Drive (VLD)	Yes

Crown XTi6002

Crown XTi4002

The Crown XTi 4002 is part of the XTi2 Series - one of the most powerful and innovative amplifiers on the market.

XTi 4002 Power:

2Ω Stereo (per channel) 1600W*
4Ω Stereo (per channel) 1200W
8Ω Stereo (per channel) 650W
8Ω Bridge - Mono 3200W
4Ω Bridge - Mono 2400W
*1kHz, 20mS burst, both channels driven

Crown XTi2002

Crown XTi1002

The E Series is a range of lightweight, high-power switch mode amplifiers designed to the highest standards of reliability and sound quality. Developed for the touring market, E Series retain the sonic integrity of the benchmark MC and T Series amplifiers, without the physical weight. 

The switch mode power supply is capable of delivering high peaks without any perceptible bass 'sag' at very low distortion and is kept within its safe operating area by the new, sophisticated MC² Audio 'intelligent' limiter. The E15, E25, E45 and E4-75 feature MC² Audio’s proprietary current driven output stages for ultra-high definition sound, delivered over the entire audio bandwidth. 

The E90 and the E100 are Class D amplifiers designed to meet the demands for higher power with increased efficiency whilst still maintaining the renowned MC² Audio sonic qualities and unsurpassed reliability. 

All MC² Audio products are covered by a 5 year warranty.

The E Series is a range of lightweight, high-power switch mode amplifiers designed to the highest standards of reliability and sound quality. Developed for the touring market, E Series retain the sonic integrity of the benchmark MC and T Series amplifiers, without the physical weight. 

The switch mode power supply is capable of delivering high peaks without any perceptible bass 'sag' at very low distortion and is kept within its safe operating area by the new, sophisticated MC² Audio 'intelligent' limiter. The E15, E25, E45 and E4-75 feature MC² Audio’s proprietary current driven output stages for ultra-high definition sound, delivered over the entire audio bandwidth. 

The E90 and the E100 are Class D amplifiers designed to meet the demands for higher power with increased efficiency whilst still maintaining the renowned MC² Audio sonic qualities and unsurpassed reliability. 

All MC² Audio products are covered by a 5 year warranty.