Electro-Voice XW15A bi amp Monitor "Quite possibly the best monitor available"

Our top-of-the-line floor monitors, originally designed as part of the X-Array touring lin

• Two-way, high-output design
• Vented LF enclosure
• Two symmetrical 55º enclosure angles
• Ultracompact for all-size stages
• 3-inch ND6-16 titanium/neodymium HF compression driver
• 80º x 55º Constant-directivity horn
• Neutrik Speakon® paralleled pass-through connectors on each end
• Two integrated handles
• EVX155 woofer with 4-inch voice coil

Electro-Voice TX1152FM Floor Monitor

Our Tour-X floor monitors are designed to complement all full-range cabinets in the family with common voicing.

• Two-way, high-output design
• Vented LF enclosure
• Neutrik Speakon® paralleled pass-through connectors
• Two integrated handles
• Ideal for small-to-medium stages
• Signal Synchronized Transducers™ for woofer/tweeter alignment
• Ultra low-distortion SMX2151 woofer with fully symmetric drive
• 1.25-inch DH3/2010A titanium HF compression driver
• Constant-directivity 90º H x 50º V horn
• Integrated 24 dB/octave crossover with HF protection
• 100 dB sensitivity, 133 dB maximum SPL
• Power handling: 500 W continuous, 2000 W peak
• Black EVCoat™ finish

• Color	Black
  Input Connections	Parallel Neutrik® NL4
  Speaker Type	Full-range
  Frequency Response (-3 dB)	65 - 20000 Hz
  Frequency Response (-10 dB)	45 - 20000 Hz
  Internal Crossover	Yes
  Recommended High-Pass Frequency	45 Hz
  Sensitivity 1 W/1 m	100 dB
  Max. SPL/1m (calc)	133 dB
  Coverage (Nominal -6 dB) H	90 °
  Coverage (Nominal -6 dB) V	50 °
  Rotatable Horn	No
  System Power Handling (Continuous/Program/Peak)	500 Watts
  LF Transducer	SMX2151
  HF Transducer	DH3
  Crossover Frequency	1750 Hz
  Nominal Impedance (Passive)	8 Ω
  Minimum Impedance	6.2 Ω
  Enclosure Material	Plywood and MDF with EVCOAT
  Flying	No
  Height	475 mm (18.7")
  Width	439 mm (17.28")
  Depth	655 mm (25.79")
  Weight Net	23.5 kg (51.81 lbs)

Dynacord VL152 Passive Loudspeaker

Today’s sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL152 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL152 is ideally suited to be used in most demanding applications. The VL152 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the light-weight DYNACORD DND15400 Neodymium transducer is used. High frequencies are radiated from a rotatable 90°*45° constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL152 can be used in passive fullrange mode and can be switched from the outside to ‘biamped’ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.

Dynacord VL122 Passive Loudspeaker

Today’s sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL122 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL122 is ideally suited to be used in most demanding applications. The VL122 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the rugged DND 12350 Transducer is used. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL122 can be used in passive fullrange mode and can be switched from the outside to ‘biamped’ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.

Dynacord D12 x 2 Speakers With 2x Covers

This Great package puts the Dynacord D12 Speakers with the SH-D12 Speaker cover ensuring you are protected for years to come.

Dynacord A115 Full Range Passive Speaker

These loudspeakers make ideal companions for small to medium-sized gigs, bringing DYNACORD’s legendary quality within reach of smaller budgets and offer features you would never expect in this range. 

Equipped exclusively with high-quality components, A-Line loudspeakers stand apart in their class thanks to their high power-handling capacities and 15mm-thick plywood cabinets that are as light as they are robust. Their asymmetrical footprint also makes them a convenient option for floor monitors.

• Powerful, lightweight amplifier modules featuring state-of-the-art DSP
• FIR filters providing enhanced frequency linearization and improved slew rates between MF and HF drivers
• Monitor operation mode switch enhances audibility with less risk of feedback
• Low-cut filter yields greater clarity and protects your satellites when used with a sub

Ideally suited to all PowerMate or CMS mixers.

Dynacord A112 Full Range Passive Speaker

These loudspeakers make ideal companions for small to medium-sized gigs, bringing DYNACORD’s legendary quality within reach of smaller budgets and offer features you would never expect in this range. 

Equipped exclusively with high-quality components, A-Line loudspeakers stand apart in their class thanks to their high power-handling capacities and 15mm-thick plywood cabinets that are as light as they are robust. Their asymmetrical footprint also makes them a convenient option for floor monitors.

• Powerful, lightweight amplifier modules featuring state-of-the-art DSP
• FIR filters providing enhanced frequency linearization and improved slew rates between MF and HF drivers
• Monitor operation mode switch enhances audibility with less risk of feedback
• Low-cut filter yields greater clarity and protects your satellites when used with a sub

Ideally suited to all PowerMate or CMS mixers.

Cabinet

Dynacord C12.2

The C 12.2 is a compact, trapezoidal 12" / two-way full-range cabinet offering very high power handling (500W continuous / 2000W peak) and sensitivity of 97 dB 1W/1m.

The low frequencies are reproduced by an SMX 2120 woofer, whilst in the high frequency range, a DH3 compression driver in a 90° x 50° constant directivity horn handles everything above 1650 Hz.

Flying points for eyebolts allow the cabinet to be flown vertically or horizontally. Available as an option is the DC-MBC12-UMH mounting bracket, which is compatible with the DYNACORD PI-Easy mounting system and supports up to three levels of orientation.

To extend the low bass performance, a Sub 1.15 connected in parallel is recommended.

Dynacord C 15.2

In the C 15.2, DYNACORD is offering an extremly compact, trapezoidal 15" / two-way full-range cabinet boasting very good power handling (500W continuous / 2000W peak) and sensitivity of 100 dB 1W / 1m for applications requiring an extended low end.

Here, an SMX 2151 woofer is used, whilst in the high frequency range a DH3 compression driver in a 90° x 50° constant directivity horn reproduced everything above 1550 Hz.

Flying points for eyebolts are provided to permit either vertical or horizontal suspension. Also available as an option is the DC-MBC15-UMH mounting bracket, which is compatible with the DYNACORD PI-Easy system and supports up to three levels of orientation.

To extend the low bass performance, a Sub 1.18 subwoofer connected in parallel is recommended.

Dynacord Corus 2.52 Full Range 2 x 15" Speaker

If very high sound pressure levels are required from a compact format, the trapizoidal C 25.2 double 15" / two-way full-range cabinet is the ideal choice, with its very high power handling (1000W continuous / 4000W peak) and sensitivity of 103 dB 1W / 1m.

Boasting a maximum SPL of 139 dB, it is capable - even in full-range operation - of providing coverage for larger rooms and events. In the low frequency range, two SMX 2151 woofers are used, whilst in the high frequency range, an ND2-8 neodymium compression driver in a rotatable 60° x 40° constant directivity horn covers the frequencies above 1750 Hz.

Flying points for eyebolts allow the cabinet to be suspended either vertically or horizontally.

As the ideal companion for a very powerful active 2-way system, the double 18" subwoofer Sub 2.18 is recommended together with the DSP 260 or DSP 600 controllers and power amplifiers from the SL or LX series.