Dynacord A118 Passive Subwoofer

These loudspeakers make ideal companions for small to medium-sized gigs, bringing DYNACORD’s legendary quality within reach of smaller budgets and offer features you would never expect in this range. 

Equipped exclusively with high-quality components, A-Line loudspeakers stand apart in their class thanks to their high power-handling capacities and 15mm-thick plywood cabinets that are as light as they are robust. Their asymmetrical footprint also makes them a convenient option for floor monitors.

• Powerful, lightweight amplifier modules featuring state-of-the-art DSP
• FIR filters providing enhanced frequency linearization and improved slew rates between MF and HF drivers
• Monitor operation mode switch enhances audibility with less risk of feedback
• Low-cut filter yields greater clarity and protects your satellites when used with a sub

Ideally suited to all PowerMate or CMS mixers.

Dynacord Corus SUB1.18

The Sub 1.18 is the ideal bass extension for the Corus C 12.2 or C 15.2 full-range cabinets.

In the low frequency range between 38 Hz and 250 Hz a Electro-Voice EVS-18S woofer in direct-radiator bass-reflex design produce an max. SPL of 130 dB.

Thanks to their low-pass filter, the Sub 1.18 can be operated simply in parallel mode to existing full-range cabinets. Also recommended, naturally, is the combination with the DSP 260 or DSP 600 and power amplifiers from the SL or LX series for the creation of active two-way systems.

The Sub 1.18 is prepaired for the optionally available DC-WK-C18 wheel kit.

Dynacord Corus Sub2.18 Passive Subwoofer

The Sub 2.18 is a double 18", high-power subwoofer for very high sound pressure levels: sensitivity 102 dB 1W / 1m, max. SPL 138 dB.

Boasting power handling of 1000W continuous and 4000W peak, the Sub 2.18 can be used universally for active two-way or three-way systems.

It is above all, however, the ideal companion to the C 25.2 for the creation of an active two-way system together with the DSP 260 or DSP 600 controllers and power amplifiers from the SL or LX series.

For easier transport, the Sub 2.18 is prepared for the optionally available DC-WK-C18 wheel kit.

Dynacord Corus Sub1.15 Passive Subwoofer

The Sub 1.15 is the ideal bass extension for the Corus C 12.2 or C 15.2 full-range cabinets.

In the low frequency range between 40 Hz and 260 Hz a Electro-Voice EVS-15S woofer in direct-radiator bass-reflex design produce an max. SPL of 125 dB.

Thanks to their low-pass filter, the Sub 1.15 can be operated simply in parallel mode to existing full-range cabinets. Also recommended, naturally, is the combination with the DSP 260 or DSP 600 and power amplifiers from the SL or LX series for the creation of active two-way systems.

Electro-Voice ZX1-Sub passive 12"

The Electrovoice ZX1-SUB is a compact, portable passive PA subwoofer. This sub works very well with ZX1-90B speakers for applications where increased bass extension and higher output levels are required. 

The rear panel features a speakon input & loop thru output. A 35mm top hat fitting is included so that when 2 x subs and 2 x ZX1 speakers are used, the speakers can be pole mounted above the subs, avoiding the need for separate tripod stands.

The sub does not feature an internal crossover, however the frequency response rolls off significantly above 100Hz, so it will naturally work well with smaller top speakers with a less extended response. Alternatively, an external controller such as the Electrovoice DC-ONE could be configured to provide precise active crossover & EQ for the system.
 

Dynacord Sub112 Passive 12" sub

DYNACORD´s SUB 112 is a vented, direct radiating cabinet, equipped with the high-power DYNACORD DND12S400 neodymium transducer. The conical vent system shows significantly less distortion and lower air noise at low frequencies than common circular vent openings. 
The SUB 112 contains a passive filter, 6 dB/oct., that suppresses high frequencies. Appropriate fullrange cabinets, e.g. DYNACORD’s D 8 can therefore be directly connected in parallel to the SUB 112 if an extended bass reproduction is required. You just have to connect the SUB 112 and the D 8 with a regular Speakon cable in parallel.
The SUB 112 cabinet is made of 15mm birch plywood. All corner joints and braces are grooved and glued. The cabinet´s surface is painted with a 2-K laquer finish . The acoustic foam front on a powder coated steel grille protects the DND12S400 woofer against damage during transport and bad environmental conditions. The connector panel uses two 4-pole Speakon connectors (INPUT/THRU) for a safe connection and easy daisy-chaining to other cabinets. The pin assignment is 1+/1-. Pins 2+ and 2- are also connected between the two Speakon connectors. A pole-mount flange allows easy speaker-on-a-stick applications. Please always take care that every speaker stack has been mechanically secured against accidental falling down. Please always consult a certified structural engineer for correct and safe setup methods.
The cabinet is equipped with four large rubber feet. Two handles allow easy and safe transport. A protective cover is available as an optional accessory.

Electro-Voice 2x TX1152 2x TX1181 1x Q1212 Package 

2x EV TX1152

2x EV TX1181

1x Q1212

2x VPM1500 K&M Adjustable poles

The LS18 subbass cabinet brings new versatility to NEXO GEO S12 line array systems and PS Series cabinets, delivering high SPL at a relatively low cost.

Light and easy-to-handle, the LS18 uses a single 18" long excursion driver and is compatible with all GEO S12 accessories, so it can fly with the S1230 and S1210 line array modules, or anchor a ground stack of S12 cabinets. With a steel stand fitting on top of the cabinet, the LS18 also allows for pole mounting of GEO S12 cabinets or NEXO PS15-R2 full-range speakers. 

KEY FEATURES

• High power system (137-140dB peak SPL @ 1m)
• Frequency response 30Hz-130Hz (a)
• 1 x 18" 4" voice coil long excursion 8 Ω driver
• Light and easy to handle
• Integrates with GEO S12 and PS Systems

SYSTEM APPLICATIONS

• Small to mid sized tour systems
• Stadium/Arena/Auditorium installations
• Nightclub and music venue installations
• Houses of worship
• Corporate AV and presentation systems

Electro-Voice Evid 12.1 Subwoofer

• 12-inch High-Excursion LF Transducer 
• Trapezoidal Shape allows for flexible placement 
• Secure Reinforced Cabinet Construction with Mounting Hardware included
• Extremely High Power Handling
• High Sensitivity 
• Paintable Enclosure
• Dual Voice Coil Design accommodates both Stereo Channels  
• Crossed-Over Pass-Thru Co

The Electro-Voice ® EVID 12.1 is a subwoofer system designed to complement the EVIDTM line of full-range loudspeakers. The 12.1 is ideal for supplementing the bass response of any EVIDTM model in an indoor application. It is particularly useful in sports bars, dance floors, retail environments, health clubs, restaraunts, etc. The 12.1 adds the extra dimension of a powerful low end where foreground music is desired. The 12.1’s slot-loaded design allows for flexible mounting and placement while delivering the smoothest bass response possible. The 12-inch high-excursion woofer, with its dual voicecoil design, enables both the L/R channels to feed into the speaker while at the same time providing crossed-over outputs for up to 4 satellite speakers. If desired, the 12.1 can be powered separately for an even more powerful presence. The 12.1 features reinforced steel-fastener construction that allows for a variety of mounting configurations. The 12.1 is available in black or white, and can easily be painted to match the decor. All mounting hardware is included.

Electro-Voice Evid 12.1 Subwoofer White

• 12-inch High-Excursion LF Transducer 
• Trapezoidal Shape allows for flexible placement 
• Secure Reinforced Cabinet Construction with Mounting Hardware included
• Extremely High Power Handling
• High Sensitivity 
• Paintable Enclosure
• Dual Voice Coil Design accommodates both Stereo Channels  
• Crossed-Over Pass-Thru Co

The Electro-Voice ® EVID 12.1 is a subwoofer system designed to complement the EVIDTM line of full-range loudspeakers. The 12.1 is ideal for supplementing the bass response of any EVIDTM model in an indoor application. It is particularly useful in sports bars, dance floors, retail environments, health clubs, restaraunts, etc. The 12.1 adds the extra dimension of a powerful low end where foreground music is desired. The 12.1’s slot-loaded design allows for flexible mounting and placement while delivering the smoothest bass response possible. The 12-inch high-excursion woofer, with its dual voicecoil design, enables both the L/R channels to feed into the speaker while at the same time providing crossed-over outputs for up to 4 satellite speakers. If desired, the 12.1 can be powered separately for an even more powerful presence. The 12.1 features reinforced steel-fastener construction that allows for a variety of mounting configurations. The 12.1 is available in black or white, and can easily be painted to match the decor. All mounting hardware is included.