Dynacord Xa2-PRO L3600 System
The XA2-PRO System from Dynacord is one of the best plug and play PA systems on the market, designed for DJ events and Band gigs this system really will stand the test of time and deliver in the most testing of environments.
The Xa2-PRO – L3600 system is ideal for applications such as small city open-air festivals and mobile DJ events covering distances from 20 up to 40 meters. All cabinets have a new heavy-duty structured lacquer surface and a solid-steel front grille matching the latest Dynacord enclosure design. The Xa2-PRO system’s main features – very high sound pressure levels from very compact enclosures, extremely convenient handling, and the ultimate sonic performance at a very reasonable price – will continue to be a benchmark.
The Xa2-PRO – L3600 system includes:
- 2 x FX12-PRO 12” horn-loaded coaxial two-way loudspeaker cabinet
- 4 x FX20-PRO 18” planar waveguide bass horn
- 2 x L3600FD DSP on board two-channel amplifier
A completely preconfigured, powerful plug and play sound reinforcement system including a system controller.
The Dynacord FX12-PRO is a medium longthrow mid/high- frequency cabinet in coaxial design.
It can be used also without subwoofer cabinets in high-quality sound reinforcement system for speech for medium-throw distances. The recommended active x-over frequency is 140 Hz, 18 dB/oct. Butterworth. In the lo-mid range an ND 12 A Electro-Voice loudspeaker chassis works into a conical horn. The 80x40 Constant Directivity horn, driven by an Electro-Voice 1.4" ND 6 neodymium driver delivers the frequency range above 1kHz. The FX12-PRO is equipped with a passive x-over (1kHz, 18 dB/oct). Every transducer is protected against thermal overload with an electronic circuit called voice coil tracking protection. This circuit senses the terminal voltages of the transducers and simulates the thermal behaviour of the tranducers’ voice coils. In case of a potential thermal overload the power applied to the speakers is reduced to a safe level. Power amps up to 1200W 8 Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The voice coil tracking protection exhibits ‘soft’ switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value.
The Dynacord FX20-PRO is a Planar Waveguide Basshorn, equipped with the high-power Electro-Voice EVX 180B 18" transducer.
Frequency response is 30Hz - 150Hz (-10dB), so the crossover frequency to Mid-Hi cabinets can be chosen strictly application-oriented between 80Hz and 140Hz. The cabinet is equipped with an electronic circuit called voice coil tracking protection. This circuit senses the terminal voltage of the transducer and simulates the thermal behaviour of the woofer´s voice coil. In case of potential thermal overload the power applied to the speaker is reduced to a safe level. Power amps up to 1200W/8Ohms can be used in order to have maximum dynamic range without the danger of thermal overload in non-controlled situations. The voice coil tracking protection exhibits “soft” switching characteristics, so no annoying clicks or pops are audible. The circuitry automatically resets after the voice coil temperature has reached a safe value. The FX20-PRO cabinet is made of 15mm birch plywood. All corner joints and braces are grooved and glued. The cabinet has a heavy-duty structured lacquer surface and a solid-steel front grille matching the latest Dynacord enclosure design. The connector panel uses two 4-pole Speakon connectors (IN/OUT) for a safe connection and easy daisy-chaining to other cabinets. The pin assignment is 1+/1-. Pins 2+ and 2- are also connected between the respective two Speakon connectors. When using Dynacord power amp racks or system amplifiers, the whole system can be wired with 4-pole Speakon cables without any danger of accidental wiring mistakes. The cabinet is equipped with eight large rubber feet that allow easy stacking. Six handles and four heavy-duty castors on the rear side guarantee easy and safe transport.
Dynacord L3600FD Amplifiers
- LIVE PERFORMANCE DSP AMPLIFIER
FULLY INTEGRATED PROFESSIONAL SPEAKER PROCESSING WITH FIR DRIVE TECHNOLOGY
MARKET LEADING ACOUSTIC PERFORMANCE AND ROCK SOLID RELIABILITY
TRUE 2 OHM STABILITY
INTUITIVE SYSTEM CONTROL SOFTWARE, MAKES SETUP AND CONTROL EASY
Dynacord L3600FD DSP, live performance DSP amplifier, 2 ohms stable, intuitive system control software for easy setup and control, 2x 3200 watts at 2 ohms, 2x 1800 watts at 4 ohms, 2x 950 watts at 8 ohms, balanced XLR in/out, Speaker Twist outputs, dimensions: 483 x 88 x 462.4 mm, weight: 18.2 kg